611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com features: ? thermal stability ? small size ? no bias required ? low video impedance applications: ? transmitter monitoring ? missile guidance systems ? input to low-noise amplifiers ? broadband or narrowband ecm receivers ? power and signal monitors ? doppler radar and beacon receivers ? matched units available for mult i-channel receivers, amplitude comparator systems and discriminators minimum (2) flatness standard (4) frequency sensitivity vs video standard optional range part (1) k frequency typical (3) capacitance case case (ghz) number (mv/mw) (+/-db) vswr (pf) styles styles 0.01 - 0.5 actm1114n 800 0.3 2.3:1 270 m47 m10 0.25 - 0.75 actm1133n 900 0.2 2.3:1 270 m47 m10 0.5 - 1 actm1146n 1000 0.2 2.3:1 270 m47 m10 0.5 - 2 actm1136n 1000 0.2 2.3:1 75 m47 m10 1 - 2 actm1137n 1000 0.2 2.3:1 75 m47 m10 0.1 - 4 actm1129n 900 0.4 2.3:1 270 m47 m10 2 - 4 actm1130n 900 0.3 2.3:1 12 m47 m10 notes: 1) standard output polarity is negative. if positive output is required, substitute ?p? for ?n? in part number. 2) diode values can be changed to alter the le vel of sensitivity. as sensitivity is increased, vswr will degrade. vswr will i mprove as sensitivity is lowered. flatness and tss will also be influenc ed by these changes. if your applic ations require something spe cial, please contact the factory. 3) vswr measured at or below -20dbm input power level. 4) video capacitance is used for rf bypass. this value can be changed if required for video response time or other considerati ons. contact the factory if value other than those shown are needed. advanced control components offers a se ries of tunnel detectors built in surface mount modules. these modules in clude complete detector circuits with dc returns and rf bypass capacitors. options include input pads or limiters to modify the operational range or offer input protection. the small size of surface mount packages allows for easier desi gn and lower cost. they offer high reliability and are hermetically sealed, making them ideal for operation in harsh environments. thermal stability is one of the prime advantages of tunnel diode detectors. frequencies range from 10mhz to 4ghz. the output will not vary more than +/-0.15db over the temperature range of -65c to +100c at these low frequencies. they have high s ensitivity without any bias needed for operation. standard output polarity is negat ive, but positive polarity output is an option. surface mount tunnel detectors
611 industrial way west, eatontown, nj 07724 tel: 732-460- 0212 fax: 732-460-0214 sales@advanced-control.com www.a dvanced-control.com environmental specifications: screening : mil-e-5400, mil-std-202, mil-e-16400 standard screening : operating temp: -65c to +100c internal visual per mil-std-883, method 2017 storage temp: -65c to +100c temperature cycle: -65c to +100c, 10 cycles humidity: mil-std-202f, m103, cond b op tional high-rel screening (ref mil-prf-38534) : shock: mil-std-202f, m213, cond b internal visual per mil-std-883, method 2017 altitude: mil-std-202f, m105, cond b stabilization bake per mil-std-883, method 1008 vibration : mil-std-202f, m204, cond b temperature cycle per mil-std-883, method 1010 thermal shock: mil-std-202f, m107, cond a c onstant acceleration per mil-std-883, method 2001 temperature cycle: mil-std-202f, m105c, cond d burn-in per mil-std-883, method 1015 maximum input power: +14dbm leak test per mil-std-883, method 1014 (this allows for 3db margin from possible burnout at +17dbm) external visual per mil-std-883, method 2009 7 4 1 2 3 5 6 8 9 10 0.015.002 typ. 0.200 0.320 0.270 sq. max. 0.005.002 0.080 max. 0.050 (4) plcs. (0.440 ref.) 0.085 0.045 connection pin 2 4 3 1 5 n/c gnd n/c n/c input n/c pin 6 8 7 10 9 connection gnd n/c n/c output m10 m47 part number ordering information: example: actm1130nm4720 actm1130 surface mount tunnel detector, 2 - 4ghz n: negative output polarity m47: package type 20: 20pf custom video capacitance (omit for standard value) tmsm-0205 0.050 (3) plcs. 1 2 3 4 0.015.003 typ. 0.150 0.400 max. 0.210 0.180 sq. max. ground n/c output n/c ground n/c rf input n/c 8 7 6 5 4 3 2 1 pin function 0.005.002 0.080 max. 8 7 6 5
|
